Sniff Wi-Fi

Two pieces of important news hit the wire recently: the 6 GHz band was approved for Wi-Fi, and alcohol sales have skyrocketed .  Combine the two, and what do we get? A five-pack of Coors Light Cold Hard Facts about Wi-Fi in the 6 GHz frequency band. Editor's note: This is a relatively long post, but 6 GHz Wi-Fi is an undoubtably robust topic. If you have questions after reading this blog, comment below or contact Ben via email or Twitter using the information below, and Sniff Wi-Fi will address those answers in a future post. We may be knee-deep in a global pandemic, but that doesn't mean your humble blogger can't brew up a post on the topic of 6 GHz Wi-Fi. Wi-Fi professionals will soon have unlicensed frequency available in the 6 GHz band. Here, then, are five facts to know about Wi-Fi in the soon-to-be-available 6 GHz frequency band. Fact #1: The 6 GHz band adds 1,200 MHz of spectrum for Wi-Fi The Federal Communications Commission (FCC) is the federal ...

Last week's blog about Wasted Wi-Fi prompted some questions about AP transmit power in the enterprise.   Let's answer some of those questions by doing a little Q(-Tip)&(802.11)A, an exercise in which we watch a Q-Tip video before Answering a few questions about Wi-Fi. You've seen the Q(-Tip), now on to the A(nswer)s: Wasted Wi-Fi is all about APs and/or stations making inefficient use of a Wi-Fi channel.  When Wasted Wi-Fi happens, either data rates are lower than they should be, or Retry percentages are higher than they should be. The Q becomes, where do equivalent isotropically radiated power (EIRP), transmit power and conducted power fit in? The A is, higher data rates and lower Retry percentages tend to happen when signal-to-noise ratio (SNR) is higher, and higher EIRP/conducted power/transmit power leads to higher SNR. In other words, if you talk louder, then people hear louder.  When people hear louder, they have a better chance of being...